Shandong Kaitai Group Co.,Ltd.

Manufacture(20)

Shandong Kaitai Group Co.,Ltd.

Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]

q37 series overhead rail spinner hanger shot blasting machine
Specification: Q37 series
Detail: This series for the hanger type shot blasting cleaning machine, is mainly used for casting. Structural, non-ferrcus alloy parts and other parts of the surface cleaning, shot blasting cleaning machine of this series at a single...

q32 series tumble belt type shot blasting machine
Specification: Q326,Q3210,QR3210
Detail: This series is used for surface cleaning, rust romoving, and surface intensification of each kind of middle and small scale casting, forging and so on. It is suitable for different production scale, can be standalone use and m...

copper cut wire shot
Specification: 0.3-2.5mm
Detail: product conditional cut wire shot chemical composition Cu£º58-99%£¬ microhardness1 10~300HV tensile intensity 200~500*** durability 5000 times microstructure Deformed ¦Á or ¦Á+¦Â density 8.9g/...

zinc cut wire shot
Specification: 0.6-2.5mm
Detail: product Zinc cut wire shot chemical composition Zn¡Ý99% micro ardness 40~50HV tensile intensity 90-120*** durability 6000 times microstructure deformed ¦Á density 7.1g/cm3 bulk dens...

aluminium cut wire shot
Specification: 0.6-2.5mm
Detail: product aluminium cut wire shot chemical composition Al¡Ý99% micro ardness 40~50HV tensile intensity 80~240*** durability 6500´Î times microstructure deformed ¦Á density 2.7g/cm3 bulk de...

stainless steel cut wire shot
Specification: 0.3-2.5mm
Detail: 304 Austenite Type£ºC£¼0.25%, Cr=16¡«18%, Ni=6¡«10%, Si£¼1%, Mn£¼2% 430 Ferrite Type£ºC£¼0.25%,Cr=16¡«18%, Si£¼1%, Mn£¼1% 410 Martensite Type£ºC£¼0.25%, Cr=11¡«13%, Si£¼1%, Mn£¼1% Hardness :308-509HV, 32-50HRC Hardness D...

stainless steel shot
Specification: 0.2-2.5mm
Detail: 304 Austenite Type£ºC£¼0.25%, Cr=16¡«18%, Ni=6¡«10%, Si£¼1%, Mn£¼2% 430 Ferrite Type£ºC£¼0.25%,Cr=16¡«18%, Si£¼1%, Mn£¼1% 410 Martensite Type£ºC£¼0.25%, Cr=11¡«13%, Si£¼1%, Mn£¼1% Hardness :308-509HV, 32-50HRC Hardness D...

steel cut wire shot
Specification: 1.0-2.5mm
Detail: Chemical composition: C:0.45-0.85%, Mn:0.30-1.30%, Si:0.15-0.35%, S: ¡Ü0.05%, P: ¡Ü0.04% Hardness: 1.0mm:51-53HRC 1.5mm:41-45HRC Hardness Deviation:MAX deviation ¡À3.0HRC Durability:3000-3500 times Microstruc...

cast steel grit
Specification: G10-G120
Detail: Chemical composition: C:0.70-1.20%, Mn:0.35-1.20%, Si: ¡Ý0.40%, S: ¡Ü0.05%, P: ¡Ü0.05% Specifications: G10/SG2.5, G12/SG2.0, G14/SG1.7, G16/SG1.4, G18/SG1.2, G25/SG1.0, G40/SG0.7, G50/SG0.4, G80/SG0.3, G120/SG0.2 Hardnes...

cast steel shot
Specification: S780-S110
Detail: product cast steel shot £¨C£© 0.70¡«1.20% £¨Mn£© 0.35¡«1.20% £¨Si£© ¡Ý0.40% £¨S£© ¡Ü0.05% £¨P£© ¡Ü0.05% hardness conventional£º40~50HRC special£º52~56HRC, 56~60HRC hardness d...


Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2